|
|
|
National Stock Number:
5307-00-207-8643
Federal Supply Class:
5307
National Item Identification Number:
002078643
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 401823H | 03104 | TELEDYNE BROWN ENGINEERING, INC. | | 7744855 | 00000 | ORDNANCE CORPS |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.110 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.350 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8640 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.620 INCHES MINIMUM AND 0.740 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.500 INCHES MINIMUM AND 0.620 INCHES MAXIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD PITCH DIAMETERS | +0.2854 TO 0.2869 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|