|
|
|
National Stock Number:
5307-00-207-8633
Federal Supply Class:
5307
National Item Identification Number:
002078633
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 83423 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.860 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3386 TO 0.3410 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.620 INCHES MINIMUM NUT THREAD | | 0.620 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.180 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.074 INCHES MINIMUM AND | | 0.079 INCHES MAXIMUM FIRST HOLE |
|
|