|
|
|
National Stock Number:
5307-00-207-8031
Federal Supply Class:
5307
National Item Identification Number:
002078031
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| PS112-21-0 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | PS112-21-0 | 56705 | DONALLCO INC |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.076 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.094 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 1.312 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8695 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4037 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SPECIAL FEATURES | 0.304-0.312 IN. DIA OF UNTHD PORTION | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.531 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 0.531 INCHES NOMINAL NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
|
|