|
|
|
National Stock Number:
5307-00-207-7990
Federal Supply Class:
5307
National Item Identification Number:
002077990
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2029J51 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.380 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT | CHROMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.300 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.690 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD PITCH DIAMETERS | +0.1944 TO 0.2959 INCHES STUD THREAD | | THREAD PITCH DIAMETERS | +0.2830 TO 0.2849 INCHES NUT THREAD | | THREAD SERIES DESIGNATOR | UNS NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|