|
|
|
National Stock Number:
5307-00-207-6500
Federal Supply Class:
5307
National Item Identification Number:
002076500
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 99-1368 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8735 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.438 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 5A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.710 INCHES MINIMUM NUT THREAD | | 0.580 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 1.313 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99167 | | DESIGN CONTROL REFERENCE | 99-1368 |
|
|