|
|
|
National Stock Number:
5307-00-207-6258
Federal Supply Class:
5307
National Item Identification Number:
002076258
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 10105 | 83901 | ACCESSORIES MFG AND ENGINEERING CO |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 0.750 INCHES MINIMUM AND | | 0.780 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | 0.190 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | 32 STUD THREAD | | THREAD PITCH DIAMETERS | 0.1711 TO 0.1721 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.340 INCHES MINIMUM NUT THREAD | | 0.310 INCHES MINIMUM STUD THREAD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 83901 | | DESIGN CONTROL REFERENCE | 10105 |
|
|