|
|
|
National Stock Number:
5307-00-207-5447
Federal Supply Class:
5307
National Item Identification Number:
002075447
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| PGF3087 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | PGF3087 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.109 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.250 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 36.9 ROCKWELL C MINIMUM AND 43.1 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 4.812 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS A322 ASSN STD SINGLE MATERIAL RESPONSE OR AMS A331 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD | | SPECIAL FEATURES | STUD END DRILLED FOR COTTER PIN,0.188 IN. DIA HOLE,0.250 IN. FROM END OF STUD TO CENTER OF HOLE | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.125 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 1.125 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 11 STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | THREAD PITCH DIAMETERS | +0.5689 TO 0.5720 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|