|
|
|
National Stock Number:
5307-00-207-3019
Federal Supply Class:
5307
National Item Identification Number:
002073019
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 21167P003 | 0PYA5 | CONTINENTAL MOTORS, INC. | | 21167P003 | 28839 | TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV | | 21167P3 | 28839 | TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV | | 402037P003 | 28839 | TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV | | 21167P003 | 73471 | TELEDYNE INDUSTRIES INC TELEDYNE CONTINENTAL MOTORS AIRCRAFT ENGINE DIV |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8640 | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.000 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2204 TO 0.2211 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.437 INCHES MINIMUM NUT THREAD | | 0.500 INCHES MINIMUM STUD THREAD | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.093 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM FIRST HOLE |
|