|
|
|
National Stock Number:
5307-00-207-2642
Federal Supply Class:
5307
National Item Identification Number:
002072642
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 330158 | 72447 | DANA COMMERCIAL VEHICLE MANUFACTURING, LLC | | 330158 | 95019 | DANA CORP SPICER TRANSMISSION DIV | | 8333625 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5307002072642 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5307002072642 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1035 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 2.000 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | 0.625 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | 11 STUD THREAD | | THREAD PITCH DIAMETERS | 0.5680 TO 0.5710 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.907 INCHES MINIMUM AND | | 0.969 INCHES MAXIMUM NUT THREAD | | 0.677 INCHES MINIMUM AND | | 0.697 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 11.0 ROCKWELL C MINIMUM AND | | 25.0 ROCKWELL C MAXIMUM |
|