|
|
|
National Stock Number:
5307-00-207-1862
Federal Supply Class:
5307
National Item Identification Number:
002071862
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 105-415 | 35301 | DRESSER INDUSTRIES INC LEROI DIV |
|
Techincal Specification:
| OVERALL LENGTH | 1.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1022 | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | SPECIAL FEATURES | SLOT DRIVE ON NUT END OF STUD 0.062IN. WIDE BY 0.094 IN. DEEP | | THREAD CLASS | 2A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.438 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 1.062 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 13 STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | THREAD PITCH DIAMETERS | +0.4533 TO 0.4563 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|