|
|
|
National Stock Number:
5307-00-207-1216
Federal Supply Class:
5307
National Item Identification Number:
002071216
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 3229403 | 24617 | GENERAL MOTORS CORP | | 3229403 | 7X677 | GENERAL MOTORS LLC | | MIL-DTL-1222J | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL | | OVERALL LENGTH | 2.500 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 5A STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 20 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.812 INCHES MINIMUM NUT THREAD | | 0.812 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.156 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.128 INCHES NOMINAL FIRST HOLE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-1222J |
|