|
|
|
National Stock Number:
5307-00-206-9074
Federal Supply Class:
5307
National Item Identification Number:
002069074
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2029D71 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8735 OR | | STEEL COMP 4140 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD 1ST MATERIAL RESPONSE OR | | AMS 6382 ASSN STD 2ND MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.760 INCHES MINIMUM AND | | 1.800 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.800 INCHES NOMINAL NUT THREAD | | 0.900 INCHES NOMINAL STUD THREAD | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0AHP5 | | DESIGN CONTROL REFERENCE | 2029D71 |
|
|