|
|
|
National Stock Number:
5307-00-206-7925
Federal Supply Class:
5307
National Item Identification Number:
002067925
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| A91672 | 06350 | ASSET SYSTEMS, INC. | | A91672 | 22888 | FMC CORP | | A91672 | 93408 | JOHN BEAN TECHNOLOGIES CORPORATION |
|
Techincal Specification:
| OVERALL LENGTH | 7.625 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.250 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.813 INCHES MINIMUM AND 0.875 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 11 NUT THREAD | | THREAD QUANTITY PER INCH | 11 STUD THREAD | | THREAD PITCH DIAMETERS | +0.5640 TO 0.5670 INCHES STUD THREAD | | THREAD PITCH DIAMETERS | +0.5610 TO 0.5640 INCHES NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|
|