|
|
|
National Stock Number:
5307-00-206-6421
Federal Supply Class:
5307
National Item Identification Number:
002066421
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 3310334 | 55380 | HATCH & KIRK, INC. | | 3310334 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1112 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 4.125 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 16 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 2.000 INCHES MINIMUM NUT THREAD | | 0.344 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | 3/8 IN.-16 THD UNDERCUT AT SHOULDER 1/16 IN.W BY 3/4 IN.DEEP |
|
|