|
|
|
National Stock Number:
5306-00-207-8500
Federal Supply Class:
5306
National Item Identification Number:
002078500
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 760795 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.852 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 2.000 INCHES NOMINAL | | GRIP DIAMETER | 0.4371 INCHES NOMINAL | | GRIP LENGTH | 1.625 INCHES NOMINAL | | HEAD DIAMETER | 1.000 INCHES NOMINAL | | HEAD HEIGHT | 0.188 INCHES NOMINAL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4340 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.110 INCHES NOMINAL FIRST HOLE | | WIDTH BETWEEN FLATS | 0.936 INCHES NOMINAL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.375 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|