| FASTENER LENGTH | 0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL |
| HEAD DIAMETER | 0.154 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| HEAD HEIGHT | 0.095 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HOLE DIAMETER | 0.023 INCHES NOMINAL |
| HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| HOLE QUANTITY | 4 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.099 INCHES |
| WIDTH ACROSS FLATS | 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.148 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 48 |
| THREAD SERIES DESIGNATOR | UNC |