|
|
|
National Stock Number:
5305-00-208-1583
Federal Supply Class:
5305
National Item Identification Number:
002081583
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 505-2087-002 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.438 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.047 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FASTENER LENGTH | 0.625 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.164 INCHES NOMINAL | | HEAD DIAMETER | 0.321 INCHES NOMINAL | | HEAD HEIGHT | 0.115 INCHES NOMINAL | | HEAD STYLE | BINDING | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SECOND DIAMETER FROM HEAD | 0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM | | SPECIAL FEATURES | RED GLOSS ENAMEL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | USA-72-53 MIL SPEC SINGLE TREATMENT RESPONSE AND USA-3-1 NO. 105 MIL SPEC SINGLE TREATMENT RESPONSE HEAD | | SURFACE TREATMENT | ENAMEL HEAD | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.188 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|