|
|
National Stock Number: 5305-00-206-5715
Federal Supply Class: 5305
National Item Identification Number: 002065715
Description: SCREW,EXTERNALLY RELIEVED BODY
Detail: An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
100-1S416-28 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | 5305002065715 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | 5305002065715 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | 8200214 | 19200 | US ARMY ARDEC RDECOM | FFS92TYPEISTYLE1S | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.030 INCHES NOMINAL | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | FASTENER LENGTH | 0.113 INCHES NOMINAL | FIRST DIAMETER FROM HEAD | 0.085 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | HEAD DIAMETER | 0.182 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | HEAD HEIGHT | 0.125 INCHES NOMINAL | HEAD STYLE | FLAT CHAMFER | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | STEEL COMP 1020 OVERALL | NOMINAL THREAD DIAMETER | 0.125 INCHES | THREAD CLASS | 2A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 0.083 INCHES MINIMUM | THREAD QUANTITY PER INCH | 44 | THREAD SERIES DESIGNATOR | UNF |
|