|
|
|
National Stock Number:
5120-00-222-4284
Federal Supply Class:
5120
National Item Identification Number:
002224284
Description:
REMOVER,PIN
Detail:
A HAND TOOL DESIGNED TO FACILITATE THE REMOVAL OF A PIN FROM A HOLE.
|
Manufacturer Information:
| 10086311 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 26 | 76970 | C. S. OSBORNE AND COMPANY | | 640 | 0RV00 | HORIZON TOOL INC | | 6400 | 0RV00 | HORIZON TOOL INC | | 26-E | 14846 | WRIGHT TOOL COMPANY, LLC | | 5120-00-222-4284 | 80244 | GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE | | 6400 | 35RZ7 | HORIZON TOOL INC. | | A-A-385 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | GGG-E-926 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| DIAMETER | 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | ENVIRONMENTAL ATTRIBUTE CODE | PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT | | OVERALL LENGTH | 6.000 INCHES MINIMUM AND 10.000 INCHES MAXIMUM | | MATERIAL | STEEL | | OPERATION METHOD | NONIMPACT | | SHAPE | CURVED | | SPECIAL FEATURES | HANDLE SHAPE: SQUARE, HEXAGONAL OR OCTAGONAL IN CROSS SECTION; 5/16 INCH, MINIMUM, 3/8 INCH, MAXIMUM ACROSS FLATS; SHAPE: ROCKING TAPERED TYPE WITH OPPOSITE BENDS AND END SHAPES SIMILAR TO GSA DWG. 5120-00-222-4284; MATERIAL: STEEL ALLOY; HARDNESS: 30-47 HRC; FINISH: TREATED TO PREVENT CORROSION, SMOOTH FREE FROM BURRS, FINS, CRACKS, FLASH AND ANY OTHER IMPERFECTIONS THAT MIGHT IMPAIR SERVICEABILITY; END SHAPE: END ONE TAPERED TO A POINT DIAMETER OF 1/16 INCH, OPPOSITE END IS TAPERED TO A FLAT TIP 5/16 TO 3/8 INCH WIDE | | USAGE DESIGN | REMOVES COTTER PINS ON AUTOMOTIVE,MATERIAL HANDLING AND ALL OTHER TYPES OF MECHANICAL EQUIPMENT THAT EMPLOY COTTER PIN LOCKING DEVICES |
|
|