| BOLT CIRCLE NOMINAL DIAMETER | 5.875 INCHES 2ND END |
| BOLT CIRCLE NOMINAL DIAMETER | 7.125 INCHES 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.812 INCHES 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.812 INCHES 2ND END |
| BOLT HOLE QUANTITY | 8 2ND END |
| BOLT HOLE QUANTITY | 9 1ST END |
| BONNET ATTACHMENT METHOD | BOLTED |
| BONNET TYPE | EXPOSED SPRING |
| CONNECTION TYPE | FLANGE 2ND END |
| CONNECTION TYPE | FLANGE 1ST END |
| DISK LOADING METHOD | SPRING |
| FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE |
| FIRST CONNECTION FACE TO CENTERLINE DISTANCE | 5.968 INCHES |
| FLANGE FACE DESIGN | PLAIN 1ST END |
| FLANGE FACE DESIGN | PLAIN 2ND END |
| FLANGE SHAPE | ROUND WITH HOLES 1ST END |
| FLANGE SHAPE | ROUND WITH HOLES 2ND END |
| FLOW CONTROL DEVICE | DISK |
| NOMINAL OUTSIDE DIAMETER | 7.500 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER | 8.688 INCHES 1ST END |
| NOMINAL THICKNESS | 0.875 INCHES 1ST END |
| NOMINAL THICKNESS | 1.188 INCHES 2ND END |
| OPENING PRESSURE SETTING | 685.0 POUNDS PER SQUARE INCH |
| MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| MATERIAL | STEEL CORROSION RESISTING SEAT |
| MATERIAL | STEEL CORROSION RESISTING STEM |
| SECOND CONNECTION FACE TO CENTERLINE DISTANCE | 5.250 INCHES |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE VALVE DISCHARGE FLOW RATE REQUIREMENT |
| RENEWABLE SEAT RING TYPE | THREADED |
| SPECIAL FEATURES | THE END CONNECTION IDENTIFIED ABOVE AS THE SECOND END IS THE VALVE INLET |
| VALVE DISCHARGE FLOW RATE | 39500.0 POUNDS PER HOUR |
| VALVE OPERATION METHOD | AUTOMATIC OR MANUAL |
| VALVE SIZE | 2.500 INCHES |
| STYLE DESIGNATOR | ANGLE FLANGED ENDS |