| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING COPPER ALLOY ALL ENDS |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL BOSS 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION STYLE | COMPRESSION 1ST END |
| CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.367 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTSIDE DIAMETER | 0.812 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 16.500 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| SEAT NOMINAL RADIUS | 0.125 INCHES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 1A 2ND END |
| THREAD CLASS | 2A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNEF 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |