|
|
|
National Stock Number:
4330-00-229-4157
Federal Supply Class:
4330
National Item Identification Number:
002294157
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 5131-79-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6102297 | 03312 | PPT INDUSTRIAL MACHINES LLC | | 925520 | 05779 | PARKER-HANNIFIN CORPORATION | | 7625 | 08832 | SCHROEDER INDUSTRIES LLC | | 852442 | 36378 | RAYTHEON TECHNICAL SERVICES COMPANY | | 852442 | K1182 | THALES UK LIMITED DBA THALES UK LTDTRAINING AND SIMULATION | | 930372 | 05779 | PARKER-HANNIFIN CORPORATION | | C2646 | 08832 | SCHROEDER INDUSTRIES LLC | | K-3 0-RING SPECIAL | 08832 | SCHROEDER INDUSTRIES LLC | | K-3 O-RING SPECIAL | 08832 | SCHROEDER INDUSTRIES LLC | | K3V | 08832 | SCHROEDER INDUSTRIES LLC | | CS-4330-0038 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | M24702/1-B10-75 | 55683 | WHEELER FLEET SOLUTIONS, CO. | | M24702/1-B10-75 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | TM1-1/4-10 ASSY 32262 | 03312 | PPT INDUSTRIAL MACHINES LLC | | MIL-F-24702 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-24702/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | PL409-3-1A | 86736 | NORTH AMERICAN FILTER CORP REFILCO DIV |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 100.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 4.500 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 9.500 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 10.0 ABSOLUTE AND 3.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | CELLULOSE FILTERING MEDIUM | | MATERIAL | STEEL CONTAINER/CARTRIDGE | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -40.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM |
|
|