| DRIVE SHAFT END DIAMETER | 1.5000 INCHES NOMINAL |
| DRIVE SHAFT LENGTH | 1.3510 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| DRIVE SHAFT TYPE | SPLINED, STRAIGHT EXTERNAL |
| DRIVE CONNECTION TYPE | GEAR |
| CYLINDER QUANTITY | 9 |
| DISCHARGE CONNECTION QUANTITY | 1 |
| DISCHARGE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR | 0.875-14 UNF |
| DISCHARGE CONNECTION TYPE | THREADED INTERNAL |
| DISCHARGE PRESSURE | 300.0 POUNDS PER SQUARE INCH GAGE |
| INTAKE CONNECTION QUANTITY | 1 |
| INTAKE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR | 1.062-12 UN |
| INTAKE CONNECTION TYPE | THREADED INTERNAL |
| MAXIMUM DISCHARGE FLOW RATE | 3.0 GALLONS PER MINUTE |
| MEDIA FOR WHICH DESIGNED | HYDROCARBON FUELS AND OILS |
| OPERATING SPEED AT RATED CAPACITY | 1500.0 REVOLUTIONS PER MINUTE |
| OPERATION METHOD | POWERED |
| PUMP RECIPROCATING DESIGN | SINGLE ACTING |
| PUMPING ELEMENT TYPE | PISTON |
| PUMPING ELEMENT OPERATING POSITION | HORIZONTAL |
| RECIPROCATING STROKE TYPE | FIXED |
| SPECIAL FEATURES | NOMINAL PERFORMANCE CURVES WILL BE BASED ON SEA LEVEL PERFORMANCE USINGOIL (MIL-H-5606)AT 130-150 DEG.F. PERFORMANCE AND PRODUCTION CHARACTERISTICS SHALL CONFORM TO MIL-P-19692 EXCEPT FOR TYPE I HYDRAULIC SYSTEM. PUMP MUSTOPERATE WITHOUT IMPAIRMENT OF FUNCTIONS OR CHANGE IN ADJUSTMENTS IN EXTREME TEMPERATURE CONDITIONS,LOW AND HIGH ATTITUDES AND HUMIDITIES,SHOCK CONDITIONS; AND UNDER SALT,SEA,WIND,SAND,DUST,FUNGI,BATERIA,AND INSECTS ENVIRONMENTAL CONDITIONS |