3120-00-225-1940 BEARING,SLEEVE Index 3120-00-225-1942 BUSHING,SLEEVE

National Stock Number:
3120-00-225-1941

Federal Supply Class:
3120

National Item Identification Number:
002251941

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
696659-3199193HONEYWELL INTERNATIONAL INC.
899104-699193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY10 HOLE
BODY INSIDE DIAMETER2.0200 INCHES MINIMUM AND 2.0250 INCHES MAXIMUM
BODY OUTSIDE DIAMETER2.4057 INCHES MINIMUM AND 2.4067 INCHES MAXIMUM
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
HARDNESS RATING60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
HOLE DIAMETER0.0935 INCHES MINIMUM AND 0.1310 INCHES MAXIMUM FIRST
INTERIOR FLANGE HOLE DIAMETER1.6700 INCHES MINIMUM AND 1.6800 INCHES MAXIMUM
INTERIOR FLANGE LEFT END TO CENTERLINE DISTANCE0.0380 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM
INTERIOR FLANGE WIDTH0.0620 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM
LUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR
OVERALL LENGTH1.1200 INCHES MINIMUM AND 1.1500 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONM-50,FSCM 53134 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES, INTERIOR FLANGE(S) NOT LOCATED AT EITHER END
SURFACE FINISH63.0 MICROINCHES LEFT END SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH8.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH8.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE GROOVE LOCATION AND QUANTITY1 EXTERNAL
TEST DATA DOCUMENT81343-AMS 2645 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us