| BORE CENTER TO SHANK END DISTANCE | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.3070 INCHES MINIMUM AND 0.3170 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.7400 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3230 INCHES MINIMUM AND 0.3330 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7350 INCHES MINIMUM AND 1.7755 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION |
| MATERIAL | COPPER ALLOY RACE INSERT |
| MATERIAL | GREASE LUBRICATION |
| MATERIAL | STEEL INTERNAL ROD END BODY |
| MATERIAL | STEEL COMP E52100 INNER MEMBER |
| SHANK STYLE | INTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 0.7188 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM |
| SPECIAL FEATURES | MAGNETIC PARTICLE AND MAGNAFLUX INSPECTION ROD |
| STATIC RADIAL LOAD RATING | 2500 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| THREAD CLASS | 3B |
| THREAD DIAMETER | 0.250 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 28 |