|
|
|
National Stock Number:
3120-00-179-7671
Federal Supply Class:
3120
National Item Identification Number:
001797671
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 209-001-058-1 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | 209-001-058-1 | 97499 | BELL TEXTRON INC | | ARB3E38 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | REMX3-30 | 99528 | RADIAL BEARING CORPORATION | | 209-001-058-1 | 99528 | RADIAL BEARING CORPORATION |
|
Techincal Specification:
| BORE CENTER TO SHANK END DISTANCE | 2.2200 INCHES NOMINAL | | BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM | | INNER MEMBER WIDTH | 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 0.5620 INCHES NOMINAL | | OUTER MEMBER WIDTH | 0.1970 INCHES NOMINAL | | OVERALL LENGTH | 2.5010 INCHES NOMINAL | | MATERIAL | COPPER ALLOY INNER MEMBER | | MATERIAL | COPPER ALLOY OUTER RACE MEMBER | | MATERIAL | LUBRICANT DRY FILM LUBRICATION | | MATERIAL | STEEL CORROSION RESISTING INSIDE DIAMETER SURFACE OF BODY | | MATERIAL | STEEL INTERNAL ROD END BODY | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.8100 INCHES NOMINAL | | STYLE DESIGNATOR | BALL TYPE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY | | SURFACE TREATMENT | CADMIUM INSIDE DIAMETER SURFACE OF BODY | | SURFACE TREATMENT | CADMIUM ROD END BODY | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.250 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 28 |
|
|