|
|
|
National Stock Number:
3110-00-227-4939
Federal Supply Class:
3110
National Item Identification Number:
002274939
Description:
BEARING,BALL,PIVOT
Detail:
A BEARING SPECIFICALLY DESIGNED INTERNALLY TO CARRY THE COMBINATION RADIAL AND AXIAL THRUST PRODUCED AT THE END OF A TAPERED OR CYLINDRICAL FLANGED SHAFT IN MOTION. SEE ALSO BEARING, BALL, THRUST.
|
Manufacturer Information:
| 177919 | 13943 | C G CONN LTD | | 177919 | 56232 | LOCKHEED MARTIN CORPORATION | | 205627-2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 843713 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 843713-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 4144896P1 | 24446 | GENERAL ELECTRIC COMPANY | | 843713-2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | PB14780-1 | 23667 | SMITHS DETECTION INC. | | PB14780-2 | 23667 | SMITHS DETECTION INC. | | PF4X1727 | 24617 | GENERAL MOTORS CORP | | PF4X1727BB | 24617 | GENERAL MOTORS CORP | | PF4X1727BB | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | PF4X1727 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | PF4X1727 | 7X677 | GENERAL MOTORS LLC | | PF4X2100 | 24617 | GENERAL MOTORS CORP | | PF4X727BB | 24617 | GENERAL MOTORS CORP | | PF4X727BB | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | PF4X2100 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | PF4X7727BB | 59750 | RMB MINIATURE BEARINGS INC | | PF4X1727BB | 7X677 | GENERAL MOTORS LLC | | PF4X2100 | 7X677 | GENERAL MOTORS LLC | | PF4X727BB | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| ALIGNMENT TYPE | SELF-ALIGNING | | BEARING BALL QUANTITY | 6 | | LOAD DIRECTION | ANGULAR | | OVERALL OUTSIDE DIAMETER | 0.1575 INCHES NOMINAL | | OVERALL WIDTH | 0.0709 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | ROLLING ELEMENT DIAMETER | 0.0394 INCHES NOMINAL | | SELF-ALIGNMENT LOCATION | INTERNAL | | SPECIAL FEATURES | RETAINER TYPE,L-SHAPED RETAINMENT PLATE | | TAPER ANGLE | 60.00 DEGREES NOMINAL |
|
|