| MATERIAL | STEEL COMP E52100 BALL |
| STEEL COMP E52100 INNER RING |
| STEEL COMP E52100 OUTER RING |
| PLASTIC POLYTETRAFLUOROETHYLENE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING |
| OVERALL WIDTH | 0.3125 INCHES NOMINAL |
| BORE DIAMETER | 0.3750 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.6250 INCHES NOMINAL |
| LUBRICATION MATERIAL | LUBRICATING OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| SURFACE FINISH | GROUND |
| LOAD DIRECTION | ANGULAR |
| BEARING PRELOAD RATING | 10.0 POUNDS NOMINAL |
| SPECIAL FEATURES | 10 GM CM STARTING TORQUE WITH 8 TO 12 LB PRELOAD,2 DROPS OF SPECIFIED LUBRICANT IN EACH BEARING USING A NO. 26 HYPODERMIC NEEDLE,BORE AND OD OF EACH PR OF BEARINGS MATCHED WITHIN 0.000050 IN. OF EACH OTHER,EACH PR SHALL BE CODED IN 0.000050 IN. INCREMENTS PER AFBMA SECTION 12,TORRIDS AROUND ALTERNATE BALLS LOOSELY FIT |