| MATERIAL | STEEL BALL |
| STEEL INNER RING |
| STEEL OUTER RING |
| COPPER ALLOY RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | M4001,91547 MFR REF SINGLE MATERIAL RESPONSE BALL |
| M4001,91547 MFR REF SINGLE MATERIAL RESPONSE INNER RING |
| M4001,91547 MFR REF SINGLE MATERIAL RESPONSE OUTER RING |
| AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
| OVERALL WIDTH | 1.7910 INCHES MINIMUM AND |
| 1.8110 INCHES MAXIMUM |
| BORE DIAMETER | 2.5589 INCHES MINIMUM AND |
| 2.5591 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 4.7241 INCHES MINIMUM AND |
| 4.7244 INCHES MAXIMUM |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0033 INCHES MINIMUM RADIAL AND |
| 0.0043 INCHES MAXIMUM RADIAL |
| SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P600 DEG F,C60.0 TO C64.0 ROCKWELL HARDNESS O/A,THRUST MARKING V ETCHED ON BORE OF INNER RING |
| TEST DATA DOCUMENT | P6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | RETAINER SILVER |