|
|
|
National Stock Number:
3040-00-230-0284
Federal Supply Class:
3040
National Item Identification Number:
002300284
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 11659175 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 2530002300284 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 2530002300284 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 7.500 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.408 INCHES MINIMUM AND 0.413 INCHES MAXIMUM | | LINK END HOLE DIAMETER | 0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM | | LINK END THICKNESS | 1.730 INCHES MINIMUM AND 1.750 INCHES MAXIMUM | | MAJOR DIAMETER | 1.151 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048, COMP 4130 TO 4140 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MINOR DIAMETER | 1.0500 INCHES MINIMUM AND 1.0525 INCHES MAXIMUM | | SHAFT END THICKNESS | 1.600 INCHES MINIMUM AND 1.620 INCHES MAXIMUM | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | OFFSET HEIGHT: 0.060 IN. NOMINAL | | SPLINE QUANTITY | 22 |
|
|