|
|
|
National Stock Number:
3040-00-228-1307
Federal Supply Class:
3040
National Item Identification Number:
002281307
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10867032 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL | | FIRST END DIAMETER | 0.5850 INCHES MINIMUM AND 0.5900 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.1520 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | FSC APPLICATION DATA | VALVE,FUEL CONTROL | | LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL | | OVERALL LENGTH | 13.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1020 | | STEP QUANTITY | 3 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|