|
|
|
National Stock Number:
3040-00-218-3745
Federal Supply Class:
3040
National Item Identification Number:
002183745
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 255074-2 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 255074-2 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 3472P | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 3472P | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL-5074 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL5072PC34 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL5072PC34 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL5074PC34 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL5074PC34 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| FIRST END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | MATERIAL | STEEL | | SURFACE FINISH | 63.0 MICROINCHES | | FIRST END DIAMETER | 1.9995 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.2500 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.281 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 1.625 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.750 INCHES NOMINAL | | END SIMILARITY | NOT IDENTICAL | | SECOND END STYLE | EXTERNALLY THREADED AND INDENTED FLAT KEYWAY | | SECOND END KEYWAY WIDTH | 0.3750 INCHES NOMINAL | | SECOND END EXTERNAL KEYWAY LENGTH | 1.938 INCHES NOMINAL | | SECOND END KEYWAY DEPTH | 0.188 INCHES NOMINAL | | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.469 INCHES NOMINAL | | SECOND END DIAMETER | 2.2500 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.375 INCHES NOMINAL | | LARGEST STEP DIAMETER | 2.750 INCHES NOMINAL | | OVERALL LENGTH | 29.625 INCHES NOMINAL | | STEP QUANTITY | 10 |
|
|