3040-00-163-9107, COLLAR,SHAFT

6150-00-163-9096 WIRING HARNESS,BRANCHED

National Stock Number:
3040-00-163-9107

Federal Supply Class:
3040

National Item Identification Number:
001639107

Description:
COLLAR,SHAFT

Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

Manufacturer Information:

1201565P1

10001

NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER

Techincal Specification:

BORE DIAMETER	0.3750 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM
LARGEST DIAMETER LENGTH	0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
OUTSIDE DIAMETER	0.625 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	FED STD 66 FED STD ALL MATERIAL RESPONSES OR AISI 416 ASSN STD 1ST MATERIAL RESPONSE OR SAE 51416 ASSN STD 1ST MATERIAL RESPONSE AND QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
MATERIAL	STEEL COMP 416 OR STEEL COMP 202 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 322 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 633 OR STEEL COMP 634 OR STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446
NOMINAL THREAD SIZE	0.138 INCHES SINGLE HOLE
SCREW THREAD SERIES DESIGNATOR AND LOCATION	SINGLE HOLE UNC
SECURING HOLE QUANTITY	1
SECURING HOLE TYPE AND LOCATION	THREADED SINGLE HOLE
SMALL END DIAMETER	0.450 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
STYLE DESIGNATOR	ROUND STEPPED
SURFACE FINISH	125 MICROINCHES BOTH BEARING FLATS
SURFACE FINISH	125 MICROINCHES LARGEST OUTSIDE PERIPHERY
SURFACE FINISH	125 MICROINCHES SMALLEST OUTSIDE PERIPHERY
SURFACE FINISH	63 MICROINCHES SMALLEST BEARING FLAT
SURFACE FINISH	63 MICROINCHES INSIDE PERIPHERY
SURFACE TREATMENT	PASSIVATE
THICKNESS	0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM

Click here to Register for Free 30-day Trial