| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| END NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| END NOMINAL LENGTH | 0.188 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.063 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COMP 303SE MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,ALLOY 2024,T3 FED SPEC SINGLE MATERIAL RESPONSE TEETH |
| MATERIAL | ALUMINUM ALLOY 2024 TEETH |
| MATERIAL | STEEL COMP 303SE BODY |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.233 INCHES |
| NOMINAL OVERALL LENGTH | 0.375 INCHES |
| PITCH DIAMETER | 1.2170 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | ANODIZE TEETH |
| SURFACE TREATMENT | PASSIVATE BODY |
| TEETH QUANTITY | 146 |
| TOOTH FORM | STANDARD |