|
|
|
National Stock Number:
3020-00-203-1561
Federal Supply Class:
3020
National Item Identification Number:
002031561
Description:
GEAR,SPUR
Detail:
A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also GEAR, ANTIBACKLASH, SPUR. For bulk material, see ROD, PINION.
|
Manufacturer Information:
| 516941 | 23667 | SMITHS DETECTION INC. | | 516941 | 82205 | BELFORT INSTRUMENT COMPANY | | 516941C | 23667 | SMITHS DETECTION INC. | | 516941C | 82205 | BELFORT INSTRUMENT COMPANY | | SMB168583 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| BODY STYLE | PLAIN, SOLID | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.438 INCHES BOTH ENDS | | FACE NOMINAL WIDTH | 0.125 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-268,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | HUB NOMINAL DIAMETER | 0.625 INCHES FIRST END | | HUB STYLE DESIGNATOR | PLAIN FIRST END | | III MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | PITCH DIAMETER | 0.7490 INCHES NOMINAL | | PRESSURE ANGLE | 14.5000 DEGREES | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.125 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 0.811 INCHES | | NOMINAL OVERALL LENGTH | 0.250 INCHES | | SPECIAL FEATURES | TWO SLOTS,0.097 IN. TO 0.100 IN. W,0.109 IN. DEEP,18 DEG APART CUT INTO END OF HUB TO ENGAGE INTEGRAL PIN OF SHAFT WHICH IS RETAINED BY NUT | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT | ANODIZE OVERALL | | TEETH QUANTITY | 24 | | TOOTH FORM | STANDARD |
|
|