|
|
|
National Stock Number:
2530-00-179-5482
Federal Supply Class:
2530
National Item Identification Number:
001795482
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 10936441 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 2530001795482 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 4.500 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.605 INCHES NOMINAL | | FEATURES PROVIDED | COUNTERBORE | | LINK END HOLE DIAMETER | 0.374 INCHES MINIMUM AND 0.379 INCHES MAXIMUM | | LINK END THICKNESS | 1.250 INCHES NOMINAL | | MAJOR DIAMETER | 1.000 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | MATERIAL | IRON CAST | | MINOR DIAMETER | 0.877 INCHES MINIMUM AND 0.882 INCHES MAXIMUM | | SHAFT END THICKNESS | 1.594 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | OFFSET HEIGHT: 0.625 IN. NOMINAL | | SPLINE QUANTITY | 15 | | STYLE DESIGNATOR | OFFSET, CLEVIS LINK END | | SURFACE TREATMENT | PAINT |
|
|