|
|
|
National Stock Number:
1650-00-227-7649
Federal Supply Class:
1650
National Item Identification Number:
002277649
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 7579414 | 05228 | PTI TECHNOLOGIES INC. | | AC-7681F-12Y1 | 18350 | PALL AEROPOWER CORPORATION | | M83860-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M83860/4-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-83860 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-83860 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY DIAMETER | 1.750 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.016 INCHES NOMINAL | | BODY OVERALL LENGTH | 4.437 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | HYDRAULIC SYSTEM C-135 ACFT | | MATERIAL | STEEL CORROSION RESISTING CONTAINER/CARTRIDGE | | MESH SIZE | 40.0 | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NONDEFINITIVE SPEC/STD DATA | 1 CLASS | | WIRE DIAMETER | 0.160 INCHES NOMINAL | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 300.0 FAHRENHEIT MAXIMUM |
|
|