| DRIVE SHAFT TYPE | SPLINED, STRAIGHT EXTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | MS33649-4,MS33649-8 AND MS33649-8 |
| CONNECTION QUANTITY | 8 |
| CONNECTION TYPE | DRAIN AND INLET AND OUTLET |
| DISPLACEMENT TYPE | CONSTANT |
| FSC APPLICATION DATA | LANDING GEAR,AIRCRAFT |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI AT MINUS 65 DEG F TO PLUS 250 DEG F |
| MOUNTING BOLT CIRCLE DIAMETER | 2.500 INCHES NOMINAL |
| MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. |
| MOUNTING GOVERNMENT STANDARD | AND 10261 |
| MOUNTING HOLE DIAMETER | 0.340 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 1800.0 OR 4400.0 |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT PROTRUSION LENGTH | 1.000 INCHES MINIMUM AND 1.120 INCHES MAXIMUM |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SPLINE MINOR DIAMETER | 0.500 INCHES NOMINAL |
| SPLINE QUANTITY | 12 |
| SPLINE LENGTH | 0.812 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.645 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.437-20 AND 0.750-16 |
| TORQUE LOAD RATING | 215.0 INCH-POUNDS |