|
|
|
|
 | 5935-00-190-4355 | CONNECTOR BODY,RECEPTACLE,ELECTR | 02/24/1971 |
|
 | 5935-00-190-4355 | CONNECTOR BODY,RECEPTACLE,ELECTR | | 0 |
|
 | 372-2624-015 | CONNECTOR |  TALON AIR | 33 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | 0126073-2 | NAVAL ELECTRONIC SYSTEMS SECURITY ENGINEERING CENT | 02227 | | 372-2624-015 | ROCKWELL COLLINS, INC. | 13499 |
For additional information Register for Free Trial
|
 | BODY STYLE | RECTANGULAR SHAPE | | OVERALL LENGTH | 0.890 INCHES NOMINAL | | OVERALL HEIGHT | 0.245 INCHES NOMINAL | | BODY WIDTH | 0.288 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND HEAT RESISTANT AND COLD RESISTANT | | MATING END QUANTITY | 12 | | CONTACT POSITION ARRANGEMENT STYLE | 2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END | | CONNECTOR LOCKING METHOD | FRICTION | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE OR PLASTIC EPOXY OR PLASTIC PHENOLIC SINGLE MATING END | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-P-19833, TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 3 | ACQUIRE DIRECTLY FROM THE ACTUAL MANUFACTURER, WHETHER OR NOT THE PRIME CONTRACTOR IS THE ACTUAL MANUFACTURER. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | C | THIS PART REQUIRES ENGINEERING SOURCE APPROVAL BY THE DESIGN CONTROL ACTIVITY IN ORDER TO MAINTAIN THE QUALITY OF THE PART. AN ALTERNATE SOURCE MUST QUALIFY IN ACCORDANCE WITH THE DESIGN CONTROL ACTIVITY’S PROCEDURES, AS APPROVED BY THE COGNIZANT GOVERNMENT ENGINEERING ACTIVITY. VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Army | DA | Army | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 14.58 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | All Departments | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity. |
| | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | CONNECTOR BODY, RECEPTACLE, ELECTRICAL MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). IF THE APPLICABLE (OEM OR MILITARY) DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER SHALL BE REDUCED TO ZERO (0). FOR EXAMPLE, IF THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3) DEFECTS AND REJECT ON (4) DEFECTS, THE NEW ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS AND REJECT THE ENTIRE LOT ON (1) DEFECT. EVEN THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE SAMPLE SIZE REMAINS THE SAME. THE TECHNICAL DATA CITED IN THIS SOLICITATION IS NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST MEET THE REQUIREMENTS OF THE CITED TECHNICAL DATA IN ADDITION TO THE REQUIREMENTS OF THE PART NUMBERED ITEM LISTED ON THIS SOLICITATION. NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. VENDOR ITEM CONTROL DRAWING (NEW CODE) | | Cage# 13499 and PartNumber# 372-2624-015 |
|
|
|
|
|
|
|
|
|