|
|
|
|
 | 5340-01-019-7396 | COVER,ACCESS | 04/19/1976 |
|
 | 5340-01-019-7396 | COVER,ACCESS | | 0 |
|
|
|
|
|
 | 1211986-119 | LOCKHEED MARTIN CORP | 98897 |
For additional information Register for Free Trial
|
 | SECURING DEVICE TYPE | THREADED FASTENER | | MATERIAL | PLASTIC POLYCARBONATE | | MATERIAL DOCUMENT AND CLASSIFICATION | C-22-1115 TY 4 MFR REF SINGLE MATERIAL RESPONSE |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | H | THE GOVERNMENT PHYSICALLY DOES NOT HAVE IN ITS POSSESSION SUFFICIENT, ACCURATE, OR LEGIBLE DATA TO PURCHASE THIS PART FROM OTHER THAN CURRENT SOURCE(S). (NOTE: THIS CODE IS APPLICABLE ONLY TO PARTS UNDER IMMEDIATE BUY REQUIREMENTS AND ONLY AS LONG AS THE DEFICIENCY IS UNDER REVIEW FOR RESOLUTION AND APPROPRIATE RECODING.) VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 266.00 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | COVER,ACCESS LOCKHEED MARTIN CORP. SOURCE: WILLIAMS AEROSPACE CO. INC. CAGE 3P104 CONRAD CO.,CAGE 22539 **NOTE** AN ACCEPTABLE ALTERNATE METHOD IS TO USE POLYCARBONATE SHEET PER BOEING BMS 8-135, TYPE I, GRADE PC, FORM C, SELF EXTINGUISHING, TIME 15 SEC., MAXIMUM, SUEDE FINISH ONE SIDE (SIMILAR TO HAIRCELL), COLOR: BLACK. .080" THICK FOR -111 DOUBLER AND -115 FRAME AND -121 PANEL. COMPLETED COVER ASSY TO BE FINISHED WITH EPOXY POLYAMIDE PRIMER PER MIL-P-23377 AND URETHANE COATING PER MIL-C-83286, COLOR #26555 PER FED-STD-595. **** MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). TECH DATA PACKAGE AVAILABILITY: DSCR MAY NOT HAVE AN APPROVED BIDSET FOR THIS NSN. SAMPLING: 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. |
|
|
|
|
|
|
|
|
|