|
|
|
|
 | 5340-00-177-3888 | DISK,SOLID,PLAIN | 08/15/1969 |
|
 | 5340-00-177-3888 | DISK,SOLID,PLAIN | | 0 |
|
 | CS2300-0001 | HARDWARE |  GALI CORPORATION | 155 | | 7974643 | Veh. Part - GRX | COMTAC UNLIMITED, INC. | 94 | | CS-2300-0001 | HARDWARE | CONCORD COMPONENTS INC | 2 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | CS-2300-0001 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICA | 16236 | | 7974643 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | 19207 | | 5340001773888 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES | SCY13 | | 5340001773888 | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS | A00AM |
For additional information Register for Free Trial
|
 | DIAMETER | 0.656 INCHES NOMINAL | | THICKNESS | 0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698, COMP 1008 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698, COMP 1009 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698, COMP 1015 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698, COMP 1014 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698, COMP 1020 FED SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM AND CHROMATE |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Army | DA | Army | | U.S. Marine Corps. | DM | U.S. Marine Corps. | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | DISK,SOLID,PLAIN 19207 US ARMY TANK-AUTOMOTIVE COMMAND THE ITEM DESCRIBED IN THIS SOLICITATION IS DEFINED IN WHOLE OR IN PART BY ARMY DRAWING(S). THESE DRAWING(S) MAY CONTAIN A PAINT FINISHING REQUIREMENT. WHERE SUCH REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING 16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE- MENTS OF THE ARMY DRAWING(S). THIS DRAWING CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT RESISTANT COATINGS (CARC), AND ADDITIONAL INFORMATION RELATING TO HIGH TEMPERATURE COATINGS. DCSC DWG IS AVAILABE AT DISC. THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING *OPEN SOLICITATION ONLY*. TO RECEIVE A COPY OF THE DRAWING(S), FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/ ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". |
|
| | | CS-2300-0001 | DWG | BASIC | DD | 07/22/1991 | 09/25/2006 | 16236 |
|
|
|
|
|
|
|
|