|
|
|
|
 | 5320-00-205-7403 | RIVET,SOLID | 01/01/1963 |
|
 | 5320-00-205-7403 | RIVET,SOLID | | 0 |
|
|
|
 For additional information Register for Free Trial
|
 | 11101ADJ4-5-6 | PASTUSHIN AVIATION CO | 81032 |
For additional information Register for Free Trial
|
 | FASTENER LENGTH | 0.375 INCHES NOMINAL | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | SHANK DIAMETER | 0.156 INCHES NOMINAL | | SHANK STYLE | STRAIGHT | | HEAD MAJOR DIAMETER | 0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | MATERIAL | ALUMINUM ALLOY 2117 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430,H15 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 0 | NOT ESTABLISHED. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | 0 | NOT ESTABLISHED. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". |
|
| | | QAP-EQ001 | QAP | BASIC | QA | 02/13/1996 | 09/19/2006 |  14153 |
|
|
|
|
|
|
|
|