|
|
|
|
 | 5307-00-210-6603 | STUD,PLAIN | 04/18/1973 |
|
 | 5307-00-210-6603 | STUD,PLAIN | | 0 |
|
|
|
 For additional information Register for Free Trial
|
 | 3992-1058-1 | TEXTRON SYSTEMS CORPORATION | 04614 | | 9282881-01 | WARNER ROBINS AIR LOGISTICS CENTER | 98752 |
For additional information Register for Free Trial
|
 | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | OVERALL LENGTH | 9.690 INCHES MINIMUM AND 9.810 INCHES MAXIMUM | | END ITEM IDENTIFICATION | 105 MM AN/AWG-30 TRAINABLE GUN MOUNT AND 105 MM GUN, C130 ACFT | | HARDNESS RATING | 61.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | SPECIAL FEATURES | TECH ORDER 11W1-33-7-2 FIG 6 | | MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-570,CLASS 1 OR 2 FED SPEC SINGLE MATERIAL RESPONSE |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 283.04 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | STUD, PLAIN (ROD EXTENSION) (98752) WARNER ROBINS AIR LOGISTICS CTR. .375-24 UNF- 2A THREADS X 9.810 INCHES MAX LENGTH MATERIAL ALLOY STEEL ITEM SURFACE MARKING REQUIREMENT: IN ADDITION TO MARKING REQUIREMENTS DEFINED BY TECHNICAL DATA, THE MANUFACTURER'S SYMBOL IS REQUIRED AND SHALL BE APPLIED DIRECTLY TO THE SURFACE OF THIS ITEM. THE MANUFACTURER'S SYMBOL MUST BE LISTED IN MIL-HDBK-57. DO NOT PLACE ANY MARKINGS ON BEARING SURFACES. MANUFACTURER'S SYMBOL IS NOT REQUIRED ON FASTENERS WITH A THREAD DIAMETER OF 0.190 INCHES AND SMALLER. FOR MANUFACTURER'S SYMBOL REGISTRATION INFORMATION AND INQUIRIES PLEASE VISIT THE MIL-HDBK-57 URL AT: http://www.troopsupport.dla.mil/ce/prod_services/logore g.asp MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING *OPEN SOLICITATION ONLY*. TO RECEIVE A COPY OF THE DRAWING(S), FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/ THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE 52.211-2 FOR ORDERING SUCH DATA. CRITICAL ITEM - SOURCE INSPECTION REQUIRED. DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". Quality conformance inspection requirements shall be in accordance with clause 52.246-9064. AWARDS OF THIS NSN MUST BE SOURCE INSPECTED UNLESS AWARDED TO A QSLM/QSLD SUPPLIER THAT IS LISTED ON THE APPLICABLE QSL LIST AND SUPPLYING MATERIAL THAT IS IN COMPLIANCE WITH THE QSL PROGRAM. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." | | Cage# 04614 and PartNumber# 3992-1058-1 |
|
| | | 9282881 | DWG | BASIC | DD | 04/12/2004 | 10/24/2006 |  98752 |
|
|
|
|
|
|
|
|