|
|
|
|
 | 5306-00-212-0990 | BOLT,INTERNAL WRENCHING | 05/09/1973 |
|
 | 5306-00-212-0990 | BOLT,INTERNAL WRENCHING | | 0 |
|
 | 581R399H01 | BOLT INTERNAL WRENC | | 1 | | 581R399H01 | BOLT,INTERNAL WRENC |  NOBLE SUPPLY & LOGISTICS, LLC | 5832 | | 581R399H01 | F16 ITEM | MIDWEST AEROSPACE, LTD. | 19 | | 581R399H01 | BOLT | FLIGHT SOURCE INC | 1413 | | 581R399H01 | BOLT, INTERNAL WRENC | DIXIE AIR PARTS SUPPLY, INC. | 67 | | 581R399H01 | BOLT,INTERNAL WREN | AVIARMS SUPPORT CORP | 20 | | 581R399H01 | SCREW | ALAMO AIRCRAFT, LTD. | 200 | | 581R399H01 | BOLT, INTERNAL, WREN | KWAT ENTERPRISES CORP. | 5 |
For additional information Register for Free Trial
|
|
|
 | 581R399H01 | HUCK INTERNATIONAL, INC | 17446 | | 581R399H01 | QUALITY SOCKET SCREW MANUFACTURING CORP | 5N116 | | 581R399H01 | SPS TECHNOLOGIES, LLC | 56878 | | 581R399H01 | NORTHROP GRUMMAN SYSTEMS CORPORATION | 97942 |
For additional information Register for Free Trial
|
 | FASTENER LENGTH | 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM | | HEAD DIAMETER | 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | HEAD HEIGHT | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | HOLE DIAMETER | 0.047 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.145 INCHES MINIMUM AND 0.147 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | END ITEM IDENTIFICATION | AN/AAR-47 | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM OVERALL | | HOLE CONFIGURATION STYLE | ROUND |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | C | THIS PART REQUIRES ENGINEERING SOURCE APPROVAL BY THE DESIGN CONTROL ACTIVITY IN ORDER TO MAINTAIN THE QUALITY OF THE PART. AN ALTERNATE SOURCE MUST QUALIFY IN ACCORDANCE WITH THE DESIGN CONTROL ACTIVITY’S PROCEDURES, AS APPROVED BY THE COGNIZANT GOVERNMENT ENGINEERING ACTIVITY. VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 109.74 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | BOLT INTERNAL WRENCHING NORTHROP GRUMMAN ELEC SENSORS & SYS (97942) LINTHICUM HEIGHTS MD P/N 581R399H01 ACCEPTABLE SOURCES: "PG" = 10 EACH PER "PG" MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ITEM SURFACE MARKING REQUIREMENT: IN ADDITION TO MARKING REQUIREMENTS DEFINED BY TECHNICAL DATA, THE MANUFACTURER'S SYMBOL IS REQUIRED AND SHALL BE APPLIED DIRECTLY TO THE SURFACE OF THIS ITEM. THE MANUFACTURER'S SYMBOL MUST BE LISTED IN MIL-HDBK-57. DO NOT PLACE ANY MARKINGS ON BEARING SURFACES. MANUFACTURER'S SYMBOL IS NOT REQUIRED ON FASTENERS WITH A THREAD DIAMETER OF 0.190 INCHES AND SMALLER. FOR MANUFACTURER'S SYMBOL REGISTRATION INFORMATION AND INQUIRIES PLEASE VISIT THE MIL-HDBK-57 URL AT: http://www.troopsupport.dla.mil/ce/prod_services/logore g.asp THE ACCEPTABLE SOURCE(S) MUST MEET THE REQUIREMENTS OF THE CURRENT REVISION OF THE OEM DRAWING OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL ACTIVITY. SOURCE APPROVAL REQUESTS/TECHNICAL DATA PACKAGES MUST BE SUBMITTED TO DLA WITH THE OFFER. WHEN THE PURCHASE ORDER TEXT (POT) DESCRIBES THE REQUIRED PRODUCT(S) BY NAME AND PART NUMBER OF A SPECIFIC ENTITY, BY THE NAMES AND PART NUMBERS OF A NUMBER OF SPECIFIC ENTITIES, OR BY THE NAME(S) AND PART NUMBER(S) OF SPECIFIC ENTITY/ENTITIES AS MODIFIED BY ADDITIONAL REQUIREMENTS SET FORTH IN THE POT, ONLY THAT/THOSE PRODUCT(S) HAVE BEEN DETERMINED TO MEET THE NEEDS OF THE GOVERNMENT AND ARE ACCEPTABLE. SUCH PRODUCT(S) ARE "EXACT PRODUCT(S)" AS DEFINED IN "DLAD 52.217-9002, CONDITIONS FOR EVALUATION AND ACCEPTANCE OF OFFERS FOR PART NUMBERED ITEMS." A VENDOR OFFER/QUOTATION, "BID WITHOUT EXCEPTION," IS A CERTIFICATION THAT THE "EXACT PRODUCT," MANUFACTURED AND/OR SUPPLIED BY ONE OF THE ENTITIES CITED IN THE POT WILL BE FURNISHED UNDER THE CONTRACT OR ORDER. ANY PRODUCT NOT MANUFACTURED AND/OR SUPPLIED BY ONE OF THE ENTITIES CITED IN THE POT IS AN "ALTERNATE PRODUCT," EVEN THOUGH IT MIGHT BE MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATIONS OF ONE OF THE ENTITIES CITED IN THE POT. IF AN ALTERNATE PRODUCT IS FURNISHED UNDER A CONTRACT OR ORDER FOR AN EXACT PRODUCT, THE ALTERNATE PRODUCT WILL BE AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT. DATA IS PROPRIETARY OR INSUFFICIENT FOR COMPETITIVE PROCUREMENT | Cage# 5N116 and PartNumber# 581R399H01
Cage# 97942 and PartNumber# 581R399H01
Cage# 56878 and PartNumber# 581R399H01
Cage# 17446 and PartNumber# 581R399H01 |
|
| | | 581R399 | DWG | BASIC | SI | 08/04/1981 | 09/21/2006 | 97942 |
|
|
|
|
|
|
|
|