|
|
|
|
 | 3110-00-187-5675 | BEARING,BALL,ROD END | 09/08/1972 |
|
 | 3110-00-187-5675 | BEARING,BALL,ROD END | | 0 |
|
 | MS21150-1 | BEARING |  GALI CORPORATION | 13 | | AS21150 | BEARING | GALI CORPORATION | 476 | | REP-3-S7 FS464 | Bearing | BAKER BEARING CO. | 1 | | MS21150-1 | BEARING | MIDWEST AEROSPACE, LTD. | 8 | | 001875675.3110 | BEARING, BALL | SECO PARTS & EQUIPMENT CO | 1 | | MS21150-1 | BEARING | BEARING & DRIVE SYSTEMS INC | 41 | | MS21150-1 | BEARING | BEARING & DRIVE SYSTEMS INC | 41 | | MS21150-1 | | PACE ENTERPRISE DIVISION OF 1100688ONTARIO INC | 6 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | AS21150 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | 81343 | | MS21150-1 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | 81343 | | MS21150-1 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTM | 96906 | | AS21150 | SAE INTERNATIONAL | 0U583 | | MS21150-1 | SAE INTERNATIONAL | 0U583 | | REP3S7FS464 | TIMKEN CO | 21335 | | REP3S7FS464 | ROLLER BEARING COMPANY OF AMERICA, INC. | 73134 | | REP3S7-1F | ROLLER BEARING COMPANY OF AMERICA, INC. | 73134 |
For additional information Register for Free Trial
|
 | OVERALL LENGTH | 1.7555 INCHES MINIMUM AND 1.7755 INCHES MAXIMUM | | BORE DIAMETER | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | OVERALL OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM | | OUTER RING WIDTH | 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM | | INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM | | BEARING SEAL TYPE | CONTACT | | ALIGNMENT TYPE | SELF-ALIGNING | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Army | DA | Army | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 81.26 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | BEARING, BALL, ROD END IDENTIFY TO: MIL-STD-130N DATED 17 DEC 2007. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY/FEDERAL SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY INDUSTRY) STANDARDS. REFER TO SECTION L, CLAUSE 52.211-9G13 FOR OBTAINING SUCH DATA. BEARING RESTRICTION: AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (BEARING ELEMENT, RETAINER, INNER RACE, OR OUTER RACE) MINED, PRODUCED OR MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (DEC 2010). A CONTRACTOR'S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT http://www.aviatio n.dla.mil/UserWeb/ForeignBearingWaiver/index.htm TO OBTAIN A COPY OF THE CONTRACTOR'S DECLARATION FORM. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD. IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS SOLICITATION MAY BE CANCELLED AND A WAIVER MAY BE REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED. SEE DFARS 225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS (DEC 2010). SAMPLING: 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. . | Cage# 81343 and PartNumber# MS21150-1
Cage# 73134 and PartNumber# REP3S7FS464
Cage# 73134 and PartNumber# REP3S7-1F |
|
| | | SAE AS21150C | OTH | BASIC | | 10/07/2006 | 10/07/2006 | | | SAE AS6039C | OTH | BASIC | | 10/07/2006 | 10/07/2006 | |
|
|
|
|
|
|
|
|