|
|
|
|
 | 1680-00-195-4141 | HOLDER ASSY,FLIGHT | 12/12/1971 |
|
 | 1680-00-195-4141 | HOLDER ASSY,FLIGHT |  = Manual available. | 0 |
|
 | |  METAL DYNAMICS INTERNATIONAL CORPORATION | 0 | | 3757045 | DOUBLER | WKF (FRIEDMAN) ENTERPRISES, INC. | 4 | | 375813-1 | CASE, ASSY OF | INRI INC | 3 | | 375813-1 | HOLDER ASSY;FLLGHT | AIR & GROUND AVIATION INC | 80 |
For additional information Register for Free Trial
|
|
|
 | 375813-1 | LOCKHEED MARTIN CORP | 98897 | | 375813-1 | COATING SPECIALTIES, INC | 53616 |
For additional information Register for Free Trial
|
|
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. | | U.S. Coast Guard. | GP | U.S. Coast Guard. |
| | PRICE | | All Departments | Price | 1012.50 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | Q | Commerce Control List Items (CCLI) – Mutilation to the point of scrap required outside the United States. In the United States, mutilation requirement determined by the DEMIL Integrity Code. DoD Trade Security Controls (TSC) required in the United States. (Note 8). |
|
For additional information Register for Free Trial |
|  | | | HOLDER ASSEMBLY FLIGHT P/N 375813-1 EXCEPTIONS: 1. 35500 AND 355111 NOT REQUIRED 2. USE MIL-STD-130 IN LIEU OF 0227 3. EARLIER REVISION USED FOR DS5025 & 0581, PER ENGINEERS REQUEST. 4. SEE DWG 200415485 NOTES 1,3,A2 AND 14 APPLY. 5. USE STP61-213 IN LIEU OF 1451. FINISH: 1. USE MIL-PRF-85285 TYPE I (-24-24) 2. WET SAND WITH TOLUNE, TECHNICAL FEDERAL SPEC. TT-T-548 (EPS G4 1.20) MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." | Cage# 53616 and PartNumber# 375813-1
Cage# 98897 and PartNumber# 375813-1 |
|
| | | 0581 | DWG | BASIC | SS | 06/07/2012 | 10/11/2013 | 98897 | | 200415485 | DWG | BASIC | RE | 09/05/2008 | 09/17/2008 | 98752 | | DS5025 | DWG | BASIC | ST | 03/13/1996 | 10/08/2006 | 98897 | | 363174 | DWG | BASIC | SS | 11/12/1963 | 09/25/2006 | 98897 | | 0581 | DWG | BASIC | SS | 10/02/2001 | 09/24/2006 | 98897 | | 1451 | DWG | BASIC | SS | 07/15/1994 | 09/24/2006 | 98897 | | 375813 | DWG | BASIC | DD | 11/14/1998 | 09/20/2006 | 98897 | | STP61-213 | DWG | BASIC | SS | 03/12/2003 | 09/18/2006 | 98897 | | G-647 | DWG | BASIC | SS | 06/15/1982 | 09/18/2006 | 98897 |
|
|
|
|
|
|
|
|