|
|
|
|
 | 1660-01-166-7341 | DUCT ASSEMBLY,AIR CONDITIONING-H | 11/16/1983 |
|
 | 1660-01-166-7341 | DUCT ASSEMBLY,AIR CONDITIONING-H | | 0 |
|
|
|
 For additional information Register for Free Trial
|
 | 16Y232-805 | THE HANDY TOOL & MFG. CO., INC | 91750 | | 16Y323-805 | LOCKHEED MARTIN CORPORATION | 81755 | | 16Y323-805 | COATING SPECIALTIES, INC | 53616 | | 16Y323-5 | LOCKHEED MARTIN CORPORATION | 81755 | | 16Y323-805 | JEFFERY P MORIN | 8Z052 |
For additional information Register for Free Trial
|
 | END ITEM IDENTIFICATION | F-16C AIRCRAFT | | AIRCRAFT MISSION DESIGN SERIES | F-16C | | SPECIAL FEATURES | CONSIST OF OUTLET,MISC HARDWARE,ACOUSTIC INSULATION,ADHESIVE AND EPOXY A/R; EFF 5C 0001 9999; NHA 16Y034-1 |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | C | THIS PART REQUIRES ENGINEERING SOURCE APPROVAL BY THE DESIGN CONTROL ACTIVITY IN ORDER TO MAINTAIN THE QUALITY OF THE PART. AN ALTERNATE SOURCE MUST QUALIFY IN ACCORDANCE WITH THE DESIGN CONTROL ACTIVITY’S PROCEDURES, AS APPROVED BY THE COGNIZANT GOVERNMENT ENGINEERING ACTIVITY. VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 2530.34 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | F | The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP). |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | Q | Commerce Control List Items (CCLI) – Mutilation to the point of scrap required outside the United States. In the United States, mutilation requirement determined by the DEMIL Integrity Code. DoD Trade Security Controls (TSC) required in the United States. (Note 8). |
|
For additional information Register for Free Trial |
|  | | | DUCT ASSEMBLY, AIR LOCKHEED MARTIN CORP CAGE 81755 P/N 16Y323-805 Government First Article Preproduction approval required. Testing will be in accordance with applicable drawings, specifications and/or Engineering instructions. The first article offered shall be manufactured at the facilities in which production quantities are procured and produced under this contract. When submitting the first article(s) for government testing, a copy of the contract and all applicable drawings, specifications, engineering instructions, certifications, and inspection sheets shall be provided. Upon receipt and evaluation of the test report from the responsible government testing location, the contracting officer will provide final notification to the manufacturer. Any questions or concerns regarding the first article test requirements must be submitted through the contracting officer. Additional Wide Area Workflow (WAWF) instructions for government first article test CLIN: The contractor shall code the receiving report for government first article test CLIN in WAWF as Follows: Inspection at origin (Source)- Enter the DCMA office DODAAC listed on page 1 of the contract. Acceptance by other-Enter the issue by office DODAAC listed on page 1 of the contract. Ship to code-Enter the DODAAC of the test facility listed for the government first article test CLIN in the contract (See FAR Clause 52.209-4). FIRST ARTICLE TEST MARKING INSTRUCTIONS: FAT sample(s) packaging shall be clearly marked "FIRST ARTICLE TEST EXHIBIT(S) DO NOT POST TO STOCK!!!" in largest font possible with contrasting color to the packaging. Marking shall be located adjacent to the Package Shipping Label side and on at least one additional side of the package. EXCEPTIONS TO DWG: SPECIAL INSTRUCTIONS FOR NSN 1560-01-166-7341 PART NUMBER 16Y323-805 ENGINEERING DATA REQUIREMENTS DTD 25 JUNE 03. 1.0 THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED. 1.1 THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT OO-ALC ENGINEERING ACTIVITY. 1.2 MARK PER MIL-STD-130 IN LIEU OF FPS-3008. ...END OF SPECIAL INSTRUCTIONS... SOURCES: AERO PRODUCTS CAGE 53616 HILLCO MFG CO. CAGE 8Z052 HANDY TOOL AND MFG CAGE 91750 FIRST ARTICLE REQUIREMENTS: ATTN: CONTRACTOR AND SERVICE ACTIVITY TEST MONITIOR........................................ DISAPPROVED FIRST ARTICLE(S) SHALL BE RETURNED TO THE CONTRACTOR AT THE CONTRACTOR'S EXPENSE. APPROVED AND CONDITIONALLY APPROVED FIRST ARTICLE(S) SHALL BE RETAINED AT THE SERVICE TEST ACTIVITY UNTIL DISPOSITION INSTRUCTIONS ARE RECEIVED FROM THE PCO. IF DISPOSITION INSTRUCTIONS ARE NOT RECEIVED WITHIN 30 DAYS AFTER PROVIDING THE FIRST ARTICLE TEST REPORT TO DSCR, REQUEST THAT THE DSCR QA SPECIALIST BE NOTIFIED....................... CRITICAL APPLICATION ITEM: MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). SAMPLING: 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. |
|
| | | FQML-P5356-2 | DWG | BASIC | ML | 02/27/2013 | 12/02/2014 |  81755 | | 16Y323ISS134 | DWG | BASIC | AL | 03/16/2012 | 12/02/2014 | 81755 | | 16Y323ISS056 | DWG | BASIC | PL | 09/13/2010 | 12/02/2014 | 81755 | | M100 | DWG | BASIC | ST | 03/31/2014 | 05/05/2014 | 81755 | | FPS-3001 | DWG | BASIC | CN | 02/03/2003 | 08/31/2013 | 81755 | | 16Z001ISS204 | DWG | BASIC | PL | 12/21/2011 | 08/29/2013 | 81755 | | 16Z001ISS204 | DWG | BASIC | AL | 12/21/2011 | 02/22/2012 | 81755 | | FQML-P5055 | DWG | BASIC | ML | 09/01/2009 | 07/21/2011 | 81755 | | FPS-3001 | DWG | BASIC | SS | 07/21/2010 | 11/01/2010 | 81755 | | M219 | DWG | BASIC | ST | 05/20/2010 | 09/09/2010 | 81755 |
|
|
|
|
|
|
|
|