Search Criteria

NSN/NIIN No.:
Part No. :
(13-16 digit NSN/9 digit NIIN)
1560-00-213-39951560-00-213-3993
NSNDescriptionAssign Date
1560-00-213-3994BUTTON,RELEASE,WINDOW01/01/1963
NSNDescriptionDetailOpen Solicitations
1560-00-213-3994BUTTON,RELEASE,WINDOW0
Part NumberDescriptionCompanyQuantity
6-51810-2BUTTON, RELEASE DIXIE AIR PARTS SUPPLY, INC.10
6-51810-2BUTTON PILOT WINDO QUALITY AVIATION, INC20
For additional information Register for Free Trial
CompanyAward DateQuantityPriceContractDelivery Date
Free Trial04/22/2014Free TrialFree TrialSPE4A714M8141 05/22/2014
Free Trial03/20/2013Free TrialFree TrialSPE4A713M7371 04/15/2013
Free Trial01/19/1990Free TrialFree TrialF3460190M1219
Free Trial09/06/1985Free TrialFree TrialF0460684G1030
Free Trial11/19/1981Free TrialFree TrialF0460681G0044
Free Trial06/15/1976Free TrialFree TrialF3460176A0012
Free Trial10/30/1974Free TrialFree TrialF3460174A0074
For additional information Register for Free Trial
Part NumberCompanyCAGE
6-51810-2THE BOEING COMPANY81205
For additional information Register for Free Trial
NameValue
GENERAL CHARACTERISTICS ITEM DESCRIPTIONALUMINUM ALLOY QQ-A-601
For additional information Register for Free Trial
CodeDefinition
ACQUISITION METHOD CODE.
'All Departments1SUITABLE FOR COMPETITIVE ACQUISITION.
ACQUISITION METHOD SUFFIX CODE.
'All DepartmentsGTHE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2.
MAJOR ORGANIZATIONAL ENTITY.
Air ForceDFAir Force
Defense Logistics Agency.DSDefense Logistics Agency.
PRICE
All DepartmentsPrice32.40
PRECIOUS METALS INDICATOR CODES.
All DepartmentsAItem does not contain Precious Metal.
CRITICALITY CODE.
All DepartmentsXThe item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
AUTOMATIC DATA PROCESSING EQUIPMENT.
All Departments
ELECTROSTATIC DISCHARGE CODE.
All Departments
HAZARDOUS MATERIALS INDICATOR CODE.
All DepartmentsPIndicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
DEMILITARIZATION CODE.
All DepartmentsANo-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9).
For additional information Register for Free Trial
BUTTON,RELEASE,WIND ENGINEERING DATA REQUIREMENTS: 1. RELEASE OF THIS DATA TO A FOREIGN-OWNED, CONTROLLED OR INFLUENCED COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE OFFICE. 2. REFERENCE ALL DETAIL AND OR TIERED DRAWINGS, SPECIFICATIONS AND DOCUMENTS: THE REQUIRED USE OF A CLASS 1 ODS AS DEFINED IN CLAUSE H-305 AND OR L-513 IS PROHIBITED. THE CONTRACTOR MUST USE THE ALTERNATE PROCESSES AND OR CHEMICALS SPECIFIED IN THE APPLICABLE DRAWINGS, SPECIFICATIONS AND DOCUMENTS. 3. THE CONTRACTOR SHALL USE THE MOST CURRENT AMENDMENTS APPLICABLE TO EACH MIL SPEC,MIL STD,INDUSTRY SPEC OR INDUSTRY STD AS OF THE EFFECTIVE DATE OF THIS CONTRACT UNLESS OTHERWISE NOTED. 4. DRAWING 6-51810 (DASH -2) ENGR NOTES: 1-9 APPLY ENGINEERING NOTES EXCEPTIONS 1. PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS AND BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER, CURRENT DESIGN AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE (-----), DATE OF MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL NOT BE MARKED WITH THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE. 2. DELETE REFERENCE TO 2-5000 OR D2-5000 AND BAC 5005 3. DIMENSIONS AND TOLERANCES PER ASME Y14.5 IN LIEU OF MIL-STD-8 / ANSI Y14.5 4. SURFACE TEXTURE PER ASME B46.1 IN LIEU OF BACD 2097 5. FINISH CODE F-2.60 DEFINED: CHEMICAL TREAT ACCORDING TO MIL-DTL-5541, CLASS 1A OR ANODIZE ACCORDING TO MIL-A-8625, TYPE I OR IC (PREFERRED), CLASS 1. APPLY MIL-PRF-23377, TYPE I, CLASS C2 PRIMER TO A DRY FILM THICKNESS OF 0.0003 TO 0.0005 INCH ACCORDING TO THE MANUFACTURERS APPLICATION INSTRUCTIONS AND MIL-F-18264. OVERCOAT WITH TWO COATS OF A-A-3164, COLOR BLACK # 37038 PER FED-STD-595, ACCORDING TO MIL-F-18264. 6. INSPECT CASTING PER SAE AMS 2175, IN LIEU OF MIL-C-6021B 7. USE INVOLUTE SPLINES & SERRATIONS PER D2-1698 IN LIEU OF ASA B5.26 INVOLUTE SERRATIONS 8. WHEN X'ED BELOW OR LISTED IN THESE NOTES, DEFINITIONS APPLICABLE TO THIS PRODUCT ARE OR HAVE: (A) ENGINEERING CRITICAL IN APPLICATION: An item, which requires special manufacturing processes, controls, and testing of material or end items. Because of its use or application, failure to maintain the highest reliability of such an item could be catastrophic resulting in loss of life or serious injury, loss of a weapon system or extensive secondary damage, with direct impact on the capability to respond to a national emergency or to achieve wartime sustainability. (B) CRITICAL CHARACTERISTICS: Characteristics which, when defective, are likely to result in hazardous or unsafe conditions for individuals using, maintaining or depending upon the product; or, are likely to prevent performance of the tactical function of a major end item such as an aircraft, missile, space vehicle, engine or a major part thereof. (Derived from MIL-STD-1916) (C) MAJOR CHARACTERISTICS: Characteristics (other than critical or minor) which, when defective, are likely to result in failure or to reduce the usability of the product or a major end item for its intended purpose. (Derived from MIL-STD-1916) (D) MINOR CHARACTERISTICS: All characteristics not designated as critical or major but for which full conformity is required. (E) COMPLEX: Items having quality characteristics not wholly visible (hidden characteristics), in the end product for which contractual conformance must be established progressively through precise measurements, tests or controls applied during purchasing, manufacturing, performance, assembly and functional operation either as an individual item or in conjunction with other items [FAR SUBPART 46.203(b)]. (F) COMMERCIAL: Described in commercial catalogs, drawings or industrial standards [FAR SUBPART 46.203(a), (1)]. THIS PRODUCT HAS BEEN DETERMINED TO BE OR CONTAINS (AS CHECKED BELOW): ____ Engineering critical in application _____ Critical characteristics _____ Major characteristics __X___ Minor characteristics, all except critical and major ______ Complex ______ Available as a commercial product 9. When materials, processes or components are to be obtained from directed sources as indicated herein or in the specifications, alternate sources may only be utilized upon prior approval by the contracting officer of this procuring activity as a deviation. Bidders shall notify this procuring activity at the time of quotation of any drawing, specification or standard which is of more current data revision than those shown on the data listing or in these engineering notes. Determination of acceptability of the more currently dated data will be made by the responsible engineering office of this procuring activity. Lower tier specifications listed in or referenced by first tier specifications may not be shown on the data lists or engineering notes accompanying this contract but are nonetheless required by this contract for compliance. Exceptions would occur only when such lower tier requirements have been specifically waived or substitute specifications/requirements are designated herein. Reports, process sheets, inspection methods sheets and all other documents required by specifications imposed by this contract for contractor compliance which were previously required to be submitted to a prime design contractor shall be held at that facility for review by government personnel. When prime design source specifications require or provide for participation by that prime source quality, manufacturing, laboratory or engineering support services, these requirements or provisions do not apply when the contract was issued by this procuring activity. For these services or direction pertaining thereto, contact the government contract administration office or this procuring activity for assistance. The contractor is responsible for assuring that all dimensions, conditions, tests and test results identified in these engineering notes, applicable drawings, specifications and contract quality requirements are met by themselves and their suppliers. This requirement applies to all characteristics whether those characteristics have been specifically designed as being critical, major or are those minor characteristics not specifically designated as such. PROCESS DATA REQUIREMENTS (X'ED WHEN APPLICABLE) ______ Prior to beginning of manufacture, the contractor will notify the engineering office of this procuring activity of all manufacturing process and processing procedures intended for use in production of this product. Once these processes are established, no changes shall be made without prior approval of the engineering office of this procuring activity. SERIALIZATION OF PARTS (X'ED WHEN APPLICABLE) ______ Serialization of each part/assembly (contract end item) is required. MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. A COMPLETE TECH DATA PKG/BIDSET EXISTS,BUT IS EXPORT CONTROLLED THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEME
Cage# 81205 and PartNumber# 6-51810-2
Doc. NumberDoc. TypeDoc. Def.Doc. CodeDoc. DateAmdt. DateCage
BAC5300-1DWGBASICCB09/01/200611/14/2013 81205
BAC5307DWGBASICSS05/28/201309/12/2013 81205
BAC5300-1DWGBASICSS04/09/201304/17/2013 81205
BAC5300-1DWGBASICCB09/01/200601/12/2013 81205
BAC5300-2DWGBASICCB09/01/200601/11/2013 81205
BAC5300-2DWGBASICSS12/06/201201/10/2013 81205
BAC5300-1DWGBASICSS05/16/201201/10/2013 81205
6-51810DWGBASICDD03/28/196201/04/2013 81205
BAC5300DWGBASICCB10/13/199909/27/2011 81205
BAC5300DWGBASICSS09/09/201109/16/2011 81205